Model W1823 (Mfg. Since 9/10)
SETUP
13.Fasten one end of the 11⁄2" diameter vacuum hose to the intake barrel using one of the 13⁄4" hose clamps, as shown in Figure 15.
14.Fasten the inlet
15.Affix the 1" wide foam tape to the underside of the drum lid, as shown in Figure 17.
Figure 15. Vacuum tube installed.
Screw
Figure 16. Inlet
Foam
Tape
Figure 17. Collection drum cover seal and
lift cable clamping location.