INSTALLATION

++Controlling the Soundbar using Your TV Remote Control

1.Press and hold the SOUND button for more than 5 seconds while the Soundbar is turned on.

2."ON - TV REMOTE" appears on the Soundbar's display.

3.In the TV's menu, set the TV speaker to external speaker.

TV menus differ by manufacturer and model. Refer to the TV's user manual for further information. ●Only the VOLUME +/- and the MUTE buttons will be available to control the Soundbar.

This function is not available when the Soundbar is in the TV SoundConnect, TV ARC, or HDMI mode. ●Manufacturers supporting this function:

- VIZIO, LG, Sony, Sharp, PHILIPS, PANASONIC, TOSHIBA, GRUNDIG, Hisense, RCA

- This function may not be compatible with your TV's remote depending on the remote control's manufacturer.

To turn off this function, press the SOUND button for 5 seconds. "OFF - TV REMOTE" appears on the Soundbar's display.

INSTALLING THE BATTERY IN THE REMOTE CONTROL

ENG

1.Use a suitable coin to turn the remote control's battery cover counterclockwise to remove it as shown in the figure above.

2.Insert a 3V lithium battery. Keep the positive (+) pole facing up when inserting the battery. Put the battery cover on and align the '●' marks side by side as shown in the figure above.

3.Use a suitable coin to turn the remote control battery cover clockwise as far as it will go to fix it in place.

11

Page 11
Image 11
Samsung HW-K460/XE Installing the Battery in the Remote Control, ++Controlling the Soundbar using Your TV Remote Control