Samsung HW-K860/XE manual LED indicator lamp status on subwoofer, Right Side of the Soundbar

CONNECTIONS

3.Press and hold the VOL button on the remote control for at least 5 seconds with the Soundbar turned off (OFF).

EFFECT

WOOFER

VOL SOUNDB

4.The ID SET message appears on the display of the Soundbar for a short period of time, and then disappears.

ID SET

Right Side of the Soundbar

5.When the blue indicator on the subwoofer blinks, turn on the power by pressing button on the right side of the main unit or on the remote control.

6.When the connection is successfully established, the blue indicator on the rear of the subwoofer turn on without blinking.

●● If the connection process fails, the blue indicators will flash continuously. Go to Step 1 and start again.

LED indicator lamp status on subwoofer

LED	Status	Description	Resolution
		Standby (with the Soundbar main	Check the power supply to the
Red	On	unit turned off)	Soundbar main unit
		Connection failed	Connect again
			(refer to the instructions on manual
			connection in the user manual)
	On	Successfully connected	-
		(normal operation)
Blue		Standby (with the Soundbar main	Check the power supply to the
	Blinking	unit turned off)	Soundbar main unit
		Connection failed	Connect again
			(refer to the instructions on manual
			connection in the user manual)
Red and blue	Blinking	Malfunction	Contact the service centre.

20