013 | Samsung L310W guide

Connecting to a power source

You can charge the rechargeable battery (SLB-10A) by using the SAC-47 KIT which consists of the AC adapter (SAC-47) and the USB cable (SUC-C3).

When the SAC-47 and SUC-C3 are combined, they can be used as an AC cable.

Using an AC cable:

Connect the AC adapter (SAC-47) to the USB cable.

It can be used as a power cable.

Using a USB cable:

Remove the AC adapter (SAC-47). You can download stored images to your PC (p.89) or supply the power to your camera through the USB cable(SUC-C3).

Important information about USB cable usage.

Use a USB cable (SUC-C3) with the correct speciﬁcation.

If the camera is connected to the PC through a USB hub: connect the camera directly to the PC.

If the camera and other devices are connected to the PC at the same time: remove other device.

If the USB cable is connected to a port located on the front of the PC: remove the cable and connect it to a port located on the back of the PC.

If the USB port of the PC doesn’t meet the Power output standard (5V, 500mA), the camera may not be charged.

013

Image 14

Samsung L310W manual 013

Contents

Page Use this camera in the following order InstructionsGetting to know your camera Thank you for buying a Samsung Digital Camera 002 Contents 004 How to use the Fn menu055 Play mode button Thumbnail/ Enlargement button 043 Colour 044 Sharpness Contrast Saturation 005 Effect button Rotating an image Software Appendix 006 Sold Separately System chartPackage Contents Microphone Speaker Power button Flash Lens 008 Identiﬁcation of featuresMode dial Shutter button AF sensor/ Self-timer lamp Open Close BackUSB / AV / DC terminal 009 Bottom Function button 010 011 Self-timer lampCamera Status Lamp Number of images and battery life Using the SLB-10A Connecting to a power sourceSLB-10A rechargeable battery Speciﬁcation 012 013 014 How to charge the rechargeable battery SLB-10ACharging LED of the AC Adapter Charging LED Inserting the memory card Inserting the batteryBattery 015 Instructions on how to use the memory card 016 Fine Normal Label SD Secure Digital memory card017 018 When using the camera for the ﬁrst timeSetting up the language Up/Down button 019 LCD monitor indicatorImage & Full Status Icons How to use the mode dial Starting the Recording modeHow to use the Auto mode Selecting modes 021 How to use the Program modeHow to use the Manual mode 022 Using the Photo Help guide modeFunction that can be used when focusing is difﬁcult Left/Right button 023 How to use the Beauty Shot modeHow to use the Scene modes 024 How to use the Movie clip modeMovie clip can be recorded for up to 2hours Icons Scene modes Description You can record the movie clip without sound Using Successive RecordingRecording the movie clip without sound 025 Pressing the Shutter button down half way Things to watch out for when taking pictures026 Focus lock Power buttonUsing the Focus Lock 027 Tele Zoom Shutter buttonZoom W / T button 028 Wide Zoom 029 Filming screen Macro / Down button030 Examples of Function descriptions 031 Available focusing method, by Recording modeMode Auto macro Macro Normal Auto Flash range Selecting the ﬂash modeFlash / Left button 032 Icon Flash mode Description Flash mode indicatorAvailable ﬂash mode, by Recording mode 033 034 Self-timer / Right buttonSelecting the self-timer Icon Motion Icon & Self-timer lamp Motion TimerMotion Timer ﬂows are as follows. Movie Clip mode excluded 035 Menu button Menu / OK buttonFn button OK button 037 How to use the Fn menuFn button Fn button Size Fn button Quality / Frame rate Fn button Metering 038 AEB Auto Exposure Bracketing You can select the ISO sensitivity when taking picturesFn button ISO 039 040 Using the Custom White BalanceFn button White balance Icon White balance Description Fn button Exposure compensation Fn button Aperture Value Setting up the Aperture ValueSetting up the Shutter Speed Fn button Shutter Speed 042 Mode ButtonEffect button 043 Effect button Image editingColour Icon Color Description Contrast Press the E button in the Program, Manual modeSaturation Sharpness 044 Available mode Using the LCD monitor to adjust the camera settingsItems indicated by are default settings 045 046 Face DetectionFace Detection Blink Detection Self PortraitSmile Shot 047 Focus Area Description Focus Area048 Rectangular area in the center of the LCD Voice Memo Voice recording 049 Pausing while recording a voice 050 Playing back a still image Scene modeStarting play mode 051 Movie clip capture function How to capture the movie clipPlaying back a movie clip You can capture still images from the movie clip On camera movie trimming Playing back a recorded voice 053 054 Playing back a voice memoImage 100-0010 Thumbnail / Enlargement button Using the camera buttons to set the cameraPlay mode button Thumbnail display 056 Image enlargementMaximum enlargement rate in proportion to the image size Image size Play mode, the Play & Pause / Down button works as follows Info / Up buttonPlay & Pause / Down button 057 Print button Left / Right / Menu / OK buttonDelete button Left/Right/MENU/OK button activate the following 059 Effect button ResizeImage Resize Types 13M You can rotate the stored images by various degrees Effect button Rotating an imageEffect button Colour 060 Custom colour Effect button Colour Effect button Image editingRed eye removal Red eye effect can be removed from the captured image Brightness control Face RetouchContrast control Saturation control Main Menu Sub Menu Setting up the play back function using the LCD monitor063 Slide show can start only in the Show Start menu Starting the slide showStart the slide show 064 You can select image to view Selecting ImagesConﬁgure slide show effects Unique screen effects can be used for the slide show Set the slide show play interval Setting play intervalSetting Background Music Set the slide show music Protecting images PlaybackVoice memo You can add your voice to a stored still image To delete is displayed Deleting images068 069 StandardIndex Up/Down/Left/Right button Select an image to print Up/Down/Left/Right button Print size070 Copy To Card 071 Sound VolumeSound menu Start up Sound Beep Sound Shutter SoundAF Sound Self Portrait Setup menu Language Setting up the Date / Time / Date typeDisplay 075 Display brightness Start up imageQuick view Display Save Initialisation SettingsFormatting a memory Be sure to run Format on the following types of memory card File name Description Recycle Bin File name078 Imprinting the recording date Auto power offSub menus Off Do not want to use the Power Off function There is an option to include DATE/TIME on still images 080 Connecting to an external monitorSelecting video out type PictBridge Setting up the camera for connection to the printerConnecting the Camera to a Printer 081 Auto focus lamp 082 PictBridge PictBridge Picture SelectionEasy printing Initialises user-changed conﬁgurations PictBridge Print SettingPictBridge Reset 083 084 Software notesSystem requirements For Windows For Macintosh Be sure to check the system requirements About the software085 086 Setting up the application softwareYou can visit the Samsung web-site through the internet Install the software by instructions on the monitor 087 088 089 Starting PC modeDisconnecting the camera and PC Refer to page 91 Removing the removable disk An image ﬁle is transferred from the camera to your PC Downloading stored images090 Cut cuts a selected ﬁle Copy copies ﬁles 091 Removing the removable diskWindows 2000/XP/Vista Unplug the USB cable 092 Samsung MasterDownloading images Connect the camera to your PC Image viewer You can view the stored images 093 094 095 Setting up the USB Driver for MACUsing the USB Driver for MAC Speciﬁcations 096 Image Play 097Storage Sand can be particularly troublesome to cameras Be sure to observe the following precautionsImportant notes Handling the camera 099 Extremes in temperature may cause problemsDo not attempt to disassemble or modify the camera Samsung cannot be held responsible for camera malfunctions DCF Full Error File ErrorLow Battery Card Locked Before contacting a service centre Images don’t play back ﬂash does not ﬁreIncorrect date and time is displayed Colour of image is different to the original scene Case When using the USB hub103 Are other USB cables connected to the PC? When the DirectX 9.0 or later is not installed When the movie clip doesn’t play back on the PCWhen codec for play back the movie clip isn’t installed Install the codec as listed below Its working life Correct Disposal of This Product105 Correct disposal of batteries in this product 106