PC/AV Mode

Set PC/AV Mode to AV. The picture size will be enlarged. This option is useful when you view a movie.

•• Set to PC when connected to a PC.

•• Set to AV when connected to an AV device.

•• If you connect a PC using a HDMI-DVI cable, set to DVI PC.

――This function does not support Analog mode.

――Supplied for the wide models only such as 16:9 or 16:10.

――If the monitor is in HDMI, DisplayPort mode and the screen says Check Signal Cable or power saving mode activates,

press the JOG button to display the function-button screen and then select theicon. You can select PC or AV.

Source Detection

Select either Auto or Manual as the method to recognize input signal.

Key Repeat Time

Acceleration, 1 sec, or 2 sec can be selected. If No Repeat is selected, a command responds only once when a button is pressed.

Power LED On

Configure the settings to enable or disable the power LED located at the lower part of the product.

•• Working: The power LED is on when the product is turned on.

•• Stand-by: The power LED is on when the product is turned off.

Reset All

Return all the settings for the product to the default factory settings.

Information

View the current input source, frequency and resolution.

 

 

 

Picture

Information

 

 

 

 

 

 

 

 

 

 

 

 

 

*********

 

 

 

 

 

 

OnScreen Display

 

 

 

 

 

 

 

 

**kHz **Hz NN

 

 

 

 

 

 

 

 

 

 

 

 

System

 

****x****

 

 

 

 

 

 

 

 

 

 

 

 

 

Information

 

Optimal Mode

 

 

 

 

 

 

 

****x**** **Hz

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Exit

――The displayed image may differ depending on the model.

30