![](/images/new-backgrounds/1239395/23939531x1.webp)
Installation
Attaching the Stand
――Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards.
: The product is curved. Placing pressure on the product when on a flat surface may damage the product. When the product is on the ground facing up or down, do not put pressure on it.
1
2
Place the protective Styrofoam (cushion) included in the | 4 | Attach the stand base to the stand neck, and then fasten the | |
package on the floor and place the product facing down on | two screws on the base to tightly fix it. | ||
| |||
the Styrofoam, as shown in the image. |
|
| |
――Make sure to use the styrofoam (cushion) that came with the |
|
| |
monitor. |
|
|
While holding the monitor, push in the stand neck in the | - Caution |
direction of the arrow, as shown in the image. | Do not hold the product upside down only by the stand. |
|
While holding the monitor, lift the stand neck in the direction
3 | of the arrow and adjust it, as shown in the image. |
|
- Caution
Do not press down on the monitor. There is a risk of damaging the monitor.
16