2Using "PCoIP"
Secondary DNS Server
The secondary DNS IP address of the device. This field is optional.
If the DNS server IP address is configured using the Connection Manager, the address may be set as an FQDN instead of an IP address.
Domain Name
The domain name used (e.g., 'domain.local'). This field is optional. This field specifies the host or domain of the client.
FQDN
The Fully Qualified Domain Name for the host or client. The default value is
The domain name is appended if used (e.g.,
Ethernet Mode
Lets you configure the Ethernet mode of the host or client as:
Auto
100 Mbps
10 Mbps
When you choose 10 Mbps
"Warning: When
Are you sure you want to continue?" Click OK to change the parameter.
You should always set the Ethernet Mode to Auto and only use 10 Mbps
100 Mbps
Enable 802.1X Security: If the connected network supports 802.1x, Enable 802.1X Security should be enabled and
If Enable 802.1X Security is enabled, configure the Authentication, Identity and Client Certificate settings.
TLS (Transport Layer Security) is only supported as an authentication protocol at present.
Identity: Enter the product ID that will be used on the network.
Client Certificate: Select a certificate uploaded from the Certificate Upload page.
2 Using "PCoIP" 34