Samsung LF-NXN2N/EN Using PCoIP, IPv6 Tab, Enable IPv6, Link Local Address, Gateway, Domain Name

2Using "PCoIP"

IPv6 Tab

The IPv6 page lets you enable IPv6 for PCoIP devices connected to your IPv6 network.

When you make a change to one of the settings on this page, you must reboot your device for the

change to take effect.

Figure 2-4: IPv6 Configuration















Enable IPv6

Enable this field to enable IPv6 for your PCoIP devices.

Link Local Address

This field is automatically populated.

Gateway

Enter the gateway address.

Enable DHCPv6

Enable this field to set up Dynamic Host Configuration Protocol version 6 (DHCPv6) for your device. Primary DNS

The primary DNS IP address of the device. If DHCPv6 is enabled, this field is automatically populated by the DHCPv6 server.

Secondary DNS

The secondary DNS IP address of the device. If DHCPv6 is enabled, this field is automatically populated by the DHCPv6 server.

Domain Name

The domain name used (e.g., 'domain.local') for the host or client. If DHCPv6 is enabled, this field is automatically populated by the DHCPv6 server.

2 Using "PCoIP" 35