1Preparations
Icons | Description |
|
|
Move to the upper or lower menu or adjust the value for an option on the
OSD menu.
Adjust the screen brightness.
Confirm a menu selection.
Pressing the [] button when the OSD menu is not displayed will change the input source (Analog/Digital). If you power on the product or
change the input source by pressing the [] button, a message that shows the changed input source will appear at the top left corner of the screen.
Press the [AUTO] button to automatically adjust the screen settings.
AUTO | Changing the resolution in Display Properties will activate the Auto |
Adjustment function.
|
| Turn the screen on or off. | |
|
|
| |
|
| The power indicator will be lit when the product is operating normally. | |
(Power lamp) | To reduce power consumption, it is best to remove the power cable | ||
when you will not be using the product for an extended period of time. | |||
|
| ||
|
|
| |
|
| This is the PCoIP power button. It is enabled only when the stand base is | |
|
| connected to the monitor. | |
|
| The button light is on when the button is functioning properly. | |
|
| If you press and hold this button for more than 4 seconds, the | |
|
| ||
|
| connection to the server will be disconnected. | |
|
| Refer to "2.2 Connection to Use "PCoIP"" in the "Using PCoIP" | |
|
| section for details on how to connect the stand to the monitor. | |
|
|
| |
|
| When a control button on the product is pressed, the OSD guide will be | |
|
| displayed before the onscreen menu opens. (The guide shows the | |
|
| function of the button pressed.) | |
OSD Guide | To access the onscreen menu when the guide is displayed, press the | ||
|
| corresponding button again. | |
|
| The OSD guide may vary depending on the function or product model. | |
|
| Refer to the actual product. |
1 Preparations 21