Figure 2-6: <Connection Management> Configuration

•<Enable Connection Management>

If the <Enable Connection Management> option is enabled, the device can be configured and controlled by an external connection manager.

•<Identify Connection Manager By>

The <Identify Connection Manager By> selector allows the administrator to choose whether the connection manager is identified by <IP address> or by Fully Qualified Domain Name (FQDN). If connection management is disabled, this field is not required and is not editable.

Table 2-1 shows the configuration parameters available when either method is chosen. If an invalid IP address or DNS name is entered, the OSD will prompt the administrator to correct it.

Table 2-1: Connection Manager Method

METHOD

DATA FIELDS

 

 

<IP address>

Connection Manager IP Address

 

 

<FQDN>

Connection Manager DNS name

 

 

•<Enable Event Log Notification>

The <Enable Event Log Notification> field controls whether the PCoIP Host and Portal devices send the contents of their event logs to the connection management server.

•<Enable Diagnostic Log>

The <Enable Diagnostic Log> field controls whether connection management specific debug messages are written to the event log of the PCoIP Host and Portal devices.

<Discovery> Tab

The <Discovery> configuration tab allows the use of features that ease the discovery of Portals in a PCoIP system.

The Discovery parameters can also be configured using the Webpage Administration Interface.

4-1

Installing the Software