1-3 Cleaning the Monitor

Cleaning the Monitor

The panel and exterior of the cutting-edge monitor scratch easily and require careful attention. Clean the monitor according to the following steps.

1.Power off the monitor and PC.

2.Disconnect the power cable from the monitor.

To avoid electric shock, be sure you disconnect the cable by gripping the plug and do not touch the cable with wet hands.

3.Wipe the monitor using a soft, slightly damp cloth that has been squeezed .

Do not use a cleaning agent that contains alcohol or solvents, or that is surface active. Otherwise, the exterior may discolor or crack or the panel coating may come off.

Do not spray water or cleaning agent directly onto the monitor.

Otherwise, the liquid may sink into the monitor and cause a fire, electric shock, or failure.

4.Clean the exterior of the monitor using a soft cloth dampened with a small amount of water.

5.Connect the power cable to the monitor after you have finished cleaning.

6.Power on the monitor and PC.

Precautions for Storage

Using an ultrasonic humidifier may cause white stains on a highly glossy product.

Be sure you contact the nearest service center (paid service) for cleaning the inside of the monitor.

Major Safety Precautions

1-3