<Reset Parameters>
The <Reset Parameters> <Reset> button resets all configuration and permissions to factory default values.
<VMware View> Tab
The <VMware View> tab allows configuration for use with a VMware View Connection Server.
The VMware View parameters can also be configured using the Webpage Administration Interface.
Figure
<Enable VMware View>
When the <Enable VMware View> option is enabled, the Portals can be configured for use with a VMware View Connection Server.
To enable the VMware View feature, the <Connection Management> checkbox on the <Enable Connection Management> tab must be unchecked.
<Identify Connection Server by>
The <Identify Connection Server by> selector allows the administrator to choose whether the connection manager is identified by IP address or by Fully Qualified Domain Name (FQDN). If VMware View is disabled, this field is not required and is not editable.
Installing the Software |