1Preparations
Icons | Description |
|
|
Confirm a menu selection.
Pressing the [
] button when the OSD menu is not displayed will change the input source (Client/Analog). If you power on the product or
change the input source by pressing the [
] button, a message that shows the changed input source will appear at the top left corner of the screen.
Analog mode: Automatically adjust the screen settings.
Client mode: Disconnect from the server.
Power on or off the product.
Go to SETUP&RESET 
Power Key and select Power Off or Screen Off. (Refer to "7.5 Power Key" for details on
Power Key).
To turn the product on or off when Power Off is selected, press the power button.
The default setting is Power Off.
When a control button on the product is pressed, the OSD guide will be displayed before the onscreen menu opens. (The guide shows the function of the button pressed.)
OSD Guide To access the onscreen menu when the guide is displayed, press the corresponding button again.
The OSD guide may vary depending on the function or product model.
Refer to the actual product.
1 Preparations 20