2Using "PCoIP"
2.4.11OSD Logo Upload
Using the OSD Logo Upload page, change the logo displayed on the Teradici OSD.
Configuring the settings
1Set the product and PC IP addresses to enable the product to connect to the PC over a network.
2Enter the IP address set for the product in the URL address field on the PC to access the product administrative web page.
3Log in (Log In) and select Upload 
OSD Logo. The OSD Logo Upload page appears. (See the image below.)
4Select a new file to replace the logo and press Upload.
Make sure the OSD logo file is a 24bpp Bitmap file that does not exceed 256 x 64 pixels.
2 Using "PCoIP" 66