Philips WV-NW484S operating instructions Specifications, AGC HIGH, F1.4, Wide

Specifications

• General

Power supply	24 V AC, 60 Hz, 12 V DC, PoE (IEEE802.3af-compliant)
Power consumption	24 V AC: approx. 8.2 W,
	12 V DC: approx. 850 mA,
	PoE: approx. 9.2 W (Class 0)
	(When heater unit is used)
	24 V AC: approx. 16 W,
	12 V DC: approx. 920 mA,
	PoE: approx. 12 W (Class 0)
Ambient operating tempera- -10ºC to +50ºC {14ºF to 122ºF}
ture	(When heater unit is used)
	-30ºC to +50ºC {-22ºF to 122ºF} (AC 24 V or PoE)
Ambient operating humidity	Less than 90% (non-condensation)
Water Resistance	Camera unit: IEC60529 (IP66, Against ingress of water
	with harmful effects powerful jetting)
	* Only on condition that installation specified in this
	document and appropriate waterproofing is conducted
	correctly
Monitor output	VBS: 1.0 V [P-P]/75 Ω (NTSC), composite signal, RCA
	jack
External I/O terminals	ALARM IN, ALRM OUT or DAY/NIGHT IN, AUX OUT
Dimensions	159 mm (D) x 153 mm (H) {6-17/64"(D) x 6-1/32"(H)}
Weight	Approx. 1.9 kg (including bracket) {4.2 lbs}
Finish	Body: aluminum die cast, light silver
	Dome: smoke polycarbonate resin
• Camera
Pick-up device	1/3-inch interline transfer CCD
Effective Pixels	768 (H) x 494 (V)
Scanning Area	4.8 mm (H) x 3.6 mm (V)
Scanning	2:1 interlace
	* Mounted with motion adaptive interlace/progressive
	conversion function for network output
Minimum Illumination	1.5 lux {fc} (color), 0.16 lux {fc} (black and white)
(SENSE UP: OFF,	(When optional clear dome is used.)
AGC: HIGH, F1.4, WIDE)	0.6 lux {fc} (color), 0.08 lux {fc} (black and white)
Dynamic range	52 dB typ. (Super Dynamic III ON, shutter speed OFF)
Gain	ON (LOW), ON (MID), ON (HIGH), OFF

47