Adjusting the Camera

1 Adjust the camera angle while

monitoring the image on the

adjustment monitor.

Connect the adjustment monitor

(small LCD monitor, etc.) to the

monitor output terminal, and adjust

the camera angle.

Determine and set the camera angle

while repeating the fine-adjustments

in steps (1), (2) and (3) below.

75°

(3) Tilt adjustment seat

Panning table

Monitor output connector (mini-jack)

(2) Tilt lock screw

(1)

Loosen the pan lock screw, and

 

rotate the camera horizontally to

 

adjust pan.

(2)

Loosen the 2 tilt lock screws, and

 

rotate the camera vertically to

 

adjust tilt.

(3)

Turn the tilt adjustment seat to

 

adjust the screen tilt.

(4)

When the camera angle is

 

determined, tighten the pan lock

 

screw and the tilt lock screws.

(1) Pan lock screw

Note..............................................................................................................................

Also adjust the focus in step 2 during pan and tilt adjustment.

...................................................................................................................................

Important

• Be sure to tighten the panning lock screw (recommended torque: 0.59N·m {6 kgf·cm}).

28

Page 28
Image 28
Philips WV-NW484S operating instructions Adjusting the Camera