2 Adjust the focus. |
| (2) Focus lock lever |
Adjust the focus at the same time as |
|
|
pan and tilt adjustment. |
|
|
Repeat steps (1) and (2) to adjust the |
|
|
focus. |
| FAR |
|
| |
(1) Loosen the zoom lock lever, move | TELE | NEAR |
the lens to the appropriate view | (1) Zoom lock lever |
| |
angle between TELE and WIDE, | WIDE |
and tighten the lever.
(2) Loose the focus lock lever, rough- adjust the focus, and tighten the lever.
Note..............................................................................................................................
• When either the zoom or focus is changed, the other also is changed.
Repeat steps (1) and (2) to adjust.
...................................................................................................................................
3Press the ABF button.
The ABF LED (→ page 13) lights, the focus position is displayed at the
bottom of the adjustment monitor screen, and the back focus is automatically adjusted.
When connected to a network, the camera can be operated and checked from a PC.
Note..............................................................................................................................
•Pressing and quickly releasing the ABF button immediately starts ABF adjustment.
•If you hold down the ABF button for at least 2 seconds, ABF adjustment is started after
about 3 minutes. Use this for final adjustment after attaching the dome.
...................................................................................................................................
29
