Listening to the Radio—Continued
Presetting FM/DAB Stations Manually
With the Preset Write function, you can manually preset individual FM, and DAB radio stations. Presets make it easy to select your favorite stations and eliminate the need to tune the radio manually each time you want to change stations. FM stations can also be preset automatically (see page 41).
MENU/NO/
CLEAR
/
About Presets
• You can store up to 40 FM and DAB stations as presets and
this can be any combination. For example, 27 FM and 13 DAB or 18 FM and 22 DAB.
• Although FM, and DAB presets share the same numbers, they’re selected independently. For example, preset #1 will store an DAB station when the DAB band is selected, and an FM station when the FM band is selected.
ENTER • Stations can be stored to presets in any order. For example, you could store preset #5 first, #1 second, and so on.
1 | Tune into the station that you want | |||
| ||||
2 | to store as a preset. | |||
Press the [MENU/NO] button, and | ||||
| ||||
| then use the Previous and Next | |||
| [ | ]/[ | ] buttons to select “Pre- | |
set Write?”
3 | Press [ENTER]. |
| ||
|
| |||
| The preset number flashes. |
| ||
| To cancel the Preset Write function at |
| ||
4 | this point, press the [MENU/NO] button. | |||
Use the Previous and Next [ | ] | |||
| ||||
| /[ | ] buttons to select a preset. | ||
5 | To store the station, press | ||
| |||
| [ENTER]. | ||
| If no station has yet been stored to the | ||
| selected preset, “Complete” appears and | ||
| the station is stored. | ||
|
|
|
|
|
|
|
|
| If a station has already been stored in the | ||
| selected preset, the message “Over- | ||
| write?” appears. | ||
|
|
|
|
|
|
|
|
To overwrite the previously stored sta- tion, press the [YES/MODE] button. To not overwrite the previously stored station, press the [MENU/NO] button.
If the message “Memory Full” appears, all 40 presets have been stored and you’ll need to erase some presets before you can store any more stations (see page 46).
6 | Repeat steps 1 to 5 to preset more radio |
| |
| stations. |
You can also use the front panel controls.
1Tune into the station you want to store as a preset (see page 36).
2Push the multi control, and then turn it to select “PresetWrite?”
3Push the multi control.
4Turn the multi control to select a preset.
5To store the station, push the multi control.
Note:
If the current FM station supports RDS and PS (Program Service Name), the station’s name will be displayed instead of the frequency. (See page 37 for more on RDS.)
After Storing Presets You Can:
•Select them (see page 43)
•Name them for easy identification (see page 44)
•Copy them (see page 45)
•Erase them (see page 46)
42
