Connecting Antennas | Onkyo CR-715DAB manual

Connecting Antennas —Continued

Connecting an Outdoor FM Antenna

If you cannot achieve good reception with the supplied indoor FM antenna, try a commercially available out- door FM antenna instead.

Notes:

•Outdoor FM antennas work best outside, but usable results can sometimes be obtained when installed in an attic or loft.

•For best results, install the outdoor FM antenna well away from tall buildings, preferably with a clear line of sight to your local FM transmitter.

•Outdoor antenna should be located away from possi- ble noise sources, such as neon signs, busy roads, etc.

•For safety reasons, outdoor antenna should be situated well away from power lines and other high-voltage equipment.

•Outdoor antenna must be grounded in accordance with local regulations to prevent electrical shock haz- ards.

■Using a TV/FM Antenna Splitter

It’s best not to use the same antenna for both FM and TV reception, as this can cause interference problems. If cir- cumstances demand it, use a TV/FM antenna splitter, as shown.

TV/FM antenna splitter

To CD receiver

To TV (or VCR)

15

Image 15

Onkyo CR-715DAB instruction manual Connecting Antennas, Connecting an Outdoor FM Antenna, Using a TV/FM Antenna Splitter

Contents

CR-715 CR-715DAB Avis Important Safety Instructions Precautions PowerInstalling this Unit CD Player FeaturesPrecautions Ampliﬁer Supplied Accessories Before Using the CD ReceiverInstalling the Batteries Contents Front Panel Getting to Know the CD Receiver Display Getting to Know the CD Receiver Rear Panel Remote Controller Using the Remote Controller Supported Discs Disc Notes MP3 Disc Notes Connecting Antennas Connecting the DAB Antenna CR-715DAB onlyConnecting the Indoor FM Antenna Connecting Antennas Connecting an Outdoor FM AntennaUsing a TV/FM Antenna Splitter Connecting Your Speakers Connecting Speakers Cables and Jacks Connecting Other ComponentsConnecting a Subwoofer About Connections Connecting an Onkyo Cassette Deck Connecting Other Components What can you do with Connecting an Onkyo MD recorder CD receiver’s Rear panel Connecting an Onkyo CD Recorder What can you do with ? Connecting an Onkyo Component with a Digital Audio Output Hint Connecting a TV Connecting the Power Cord Connecting a Portable Audio DevicePlug the power cord into a suitable wall outlet First Time Setup Setting the Clock with the AccuClock FunctionTurning Off the AccuClock Function Turning On the CD Receiver Adjusting the VolumeUsing Headphones Basic Operation Basic Operation Adjusting the Bass and TrebleUsing the Super Bass Function Using the Direct Function Input Source Name Abbreviations Changing the Input Display Selecting Tracks Playing CDs Displaying CD Information Playing CDs Selecting MP3 Files in Navigation Mode Selecting MP3 Files in All Folder Mode Playing the MP3 Files in Only One Folder Memory Playback Press the YES/MODE/SHUFFLE DOM indicator appearsRandom Playback Repeat Playback Preferences Use the Tuning TUN/TUN buttons to tune into a station Tuning into FM Radio StationsAdjusting the Antennas Tuning into weak stereo FM stations Receiving RDS What is RDS?Listening to the Radio Displaying Radio Information Press the Band button repeat- edly to select DAB Using the Auto Tuning Function ManuallyListening to DAB Digital Radio CR-715DAB only Selecting DAB for the Very First Time Use the Tuning TUN/TUN buttons to select the DAB sta- tions Selecting DAB StationsDisplaying DAB Radio Information DAB Setup After Storing Presets You Can Presetting FM Stations Automatically Auto Preset Tune into the station that you want Presetting FM/DAB Stations ManuallyAbout Presets To store as a preset Listened to the radio will still be selected Selecting Preset StationsUse the Band or Input Buttons to select FM, or DAB Available Characters Naming Presets Copying Presets Erasing Presets Erasing a Preset’s Name Setting AccuClock to Use a Speciﬁc Station Setting the Clock Displaying the Time in Standby Mode Setting the ClockSetting the Clock Manually Using the 12- or 24-hour Format About the Timers Using the Timers If Clock appears, you need to set Using the TimersProgramming the Timers You must set the clock before you can program Press the STANDBY/ON button If you selected Once, use the PreIf you selected Every, use the Pre If you selected Days Set, use Press Enter repeatedly to see Turning Timers On and OffChecking Timer Settings All of the timer’s settings Using the Sleep Timer Canceling the Sleep TimerChecking the Remaining Sleep Time CD Playback TroubleshootingPower Audio External Components TroubleshootingRemote Controller Tuner Timers Tuner Section SpeciﬁcationsGeneral Ampliﬁer Section Memo Memo 3 4 4 3 3