Onkyo CR-715DAB instruction manual Rear Panel

Getting to Know the CD Receiver—Continued

Rear Panel

1 2 3* 4 5 6* 7

8 9* J K * CR-715DAB only

The page numbers in parentheses show where you can find the main explanation for each item.

ALINE 1 IN (22)

This analog audio input is for connecting a compo- nent with an analog output, such as a TV, or a turn- table with a built-in phono equalizer.

BMD/TAPE IN/OUT (18, 19)

These analog audio inputs and outputs are for con- necting a recorder with an analog input and output, such as a MiniDisc recorder or cassette deck.

CDAB ANTENNA (CR-715DAB only) (14)

This jack is for connecting a DAB antenna.

DFM ANTENNA (14, 15)

This jack is for connecting an FM antenna.

ESUBWOOFER PRE OUT (17)

This jack is for connecting a powered subwoofer.

FDC OUT (CR-715DAB only)

This jack is for powering the Onkyo UWL-1 Wire- less USB Audio Transport. Only connect the special cable included with the UWL-1. Do not connect any other cable, as it will cause a malfunction. See the UWL-1’s instruction manual for more information.

GSPEAKERS (16)

These terminal posts are for connecting speakers.

H REMOTE CONTROL (18–22)

This (Remote Interactive) jack can be con-

nected to an jack on another Onkyo component. The CD receiver’s remote controller can then be

used to control that component. To use , you must make an analog audio connection (RCA) between the CD receiver and the other component, even if they are connected digitally.

IOPTICAL DIGITAL IN (CR-715DAB only) (21)

This optical digital audio input can be used to con- nect a component with an optical digital output, such as a CD recorder, MD recorder, games con- sole, satellite tuner, or personal computer. Use a commercially available optical digital audio cable to make the connection.

JDOCK/CDR IN/OUT (20, 22)

These analog audio inputs and outputs are for con- necting a recorder with an analog input and output such as a CD recorder, or an Onkyo RI Dock.

KPower cord (23)

See pages 14–23 for connection information.

9