![](/images/new-backgrounds/1016612/16612101x1.webp)
7 | If you selected Once, use the Pre- | ||
| |||
| vious and Next [ | ]/[ | ] but- |
tons to select the day, and then press [ENTER].
You can select: SUN, MON, TUE, WED,
THU, FRI, or SAT.
8 | If you selected Every, use the Pre- | |||||
| ||||||
| vious and Next [ | ]/[ | ] but- | |||
| tons to select the day, Everyday, or | |||||
| Days Set, and then press [ENTER]. | |||||
| You can select the following: |
| ||||
| MON | TUE | WED |
| THU | FRI |
| SUN | Days Set | Everyday | SAT | ||
9 | If you selected Days Set, use the | |||||
| ||||||
| Previous and Next [ |
| ]/[ | ] but- | ||
| tons to select the first day, and | |||||
| then press [ENTER]. |
|
|
Use the Previous and Next [ ]/
[ ] buttons again to select the last day, and then press [ENTER].
You can select only consecutive days.
10 | Use the Previous and Next [ | ]/ | |
| |||
| [ | ] buttons to specify the On |
|
| time, and then press [ENTER]. |
|
You can also use the remote controller’s number buttons to enter the time. For example, to enter 7:29, press [>10], [0], [7], [2], and [9].
Notes:
•Once the On time is set, the Off time is automatically set to one hour later.
•To ensure that the first few seconds of a program are recorded when using timer recording, set the On time slightly ahead of the program’s start time (about 1 minute).
11 | Use the Previous and Next [ | ]/ | |
| |||
| [ | ] buttons to specify the Off |
|
| time, and then press [ENTER]. |
|
|
| TIMER indicator |
|
| |
| Underscore indicates | Number of | |||
| timer programmed for | programmed | |||
| recording |
| timer |
| |
12 | Use the Previous and Next [ | ]/ | |||
[ | ] buttons to specify the CD |
| |||
|
| ||||
| receiver’s volume level, and then | ||||
| press [ENTER]. |
|
| ||
| The default setting is 10. |
|
| ||
| If you want to use your normal volume | ||||
| level setting for the timer, press the Pre- | ||||
| vious [ | ] button repeatedly until |
|
“TimerVol.Off” appears on the display. In this case, the timer will use the volume level that was set before the CD receiver was set to Standby.
13 | Press the [STANDBY/ON] button |
| |
| to set the CD receiver to Standby. |
Notes:
•Be sure to set the CD receiver to Standby, otherwise the timed opera-
tion will not work.
• While a timed operation is in progress, you can cancel it by pressing the [TIMER] or [SLEEP] button.
•While timed recording is in progress, the output of the CD receiver is muted. To hear what’s being recorded, press the [MUTING] button. Press it again to mute the CD receiver.
•Memory, random, and
To return to step 1 and start timer programming all over again, press the [MENU/NO] button at any point in this procedure.
51