Copying Presets
With the Preset Copy function, you can organize your presets in the order you want. When you copy a preset, its name is also copied.
MENU/NO/
CLEAR
/
ENTER
1 | Select the preset you want to copy |
| |
| (see page 43). |
2 | Press the [MENU/NO] button, and | ||||
| |||||
| then use the Previous and Next | ||||
| [ |
| ]/[ |
| ] buttons to select “Pre- |
|
|
| |||
setCopy?”
3 | Press [ENTER]. | ||
| |||
| The number of the preset to be copied | ||
| flashes. |
| |
4 | Use the Previous and Next | ||
| |||
| [ | ]/[ | ] buttons to select the |
| destination preset. | ||
The number of the destination preset flashes.
5 | To copy the preset, press | ||
| |||
| [ENTER]. | ||
| If no station has yet been stored in the | ||
| destination preset, the station is copied | ||
| and “Complete” appears. | ||
|
|
|
|
|
|
|
|
If a station has already been stored in the destination preset, the message “Over- write?” appears.
To overwrite the previously stored sta- tion, press [ENTER].
To not overwrite the previously stored station, press the [MENU/NO] button.
You can also use the front panel controls.
1Select the preset you want to copy (see page 43).
2Push the multi control, and then turn it to select “PresetCopy?”
3Push the multi control.
4Turn the multi control to select the destination pre- set.
5To copy the preset, push the multi control.
Tip:
If you favorite station is stored in preset #5 and you want to make it preset #1, copy preset #5 to preset #1. To keep the station that’s already stored in preset #1, you may want to copy it to an unused preset first.
45
