2Connecting and Using a Source Device
Source AutoSwitch Settings
Turning on the display with Source AutoSwitch On, and the previous video source selection is not active, the display will automatically search the different video input sources for active video.
If the display TV source is active (TV tuner connected to the display) the Source AutoSwitch search function becomes inactive. The display will remain in the TV source.
Configuring Source AutoSwitch Settings
This product can only be controlled by using the remote control.
1Press MENU on the remote control.
2Press 
/
to move to Input and press [
].
3Press 
/
to move to Source AutoSwitch Settings and press [
].
4Press 
/
to move to Source AutoSwitch and press [
].
Source AutoSwitch
When the Source AutoSwitch is On, the display video source will automatically be searched for active video.
The Primary Source selection will be activated, if the current video source is not recognized. Secondary source selection will become active, if no primary video source is available.
If both the primary and secondary input sources are not recognized, the display will perform two searches for an active source, each search checking the primary and then secondary source. If both searches fail, the display will return to the first video source and display a message indicating that there is no signal.
When the Primary Source selection is set to All, the display will search all the video source inputs twice in sequence looking for an active video source, returning back to the first video source in the sequence if no video is found.
S o u r c e A u t o S w i t c h S e t t i n g s
S o u r c e A u t o S w i t c h | : | O f f |
P r i m a r y S o u r c e | : | A l l |
S e c o n d a r y S o u r c e | : | P C |
M o v e | E n t e r | R e t u r n |
Press 
/
to select the option you want and press [
].
2 Connecting and Using a Source Device 59