6Settings
6.11.4Standby Control
You can set the screen standby mode to be applied when an input signal is received.
Setting Standby Control
1Press MENU on the remote control.
2Press / to move to Setup and press [].
3Press / to move to Advanced Settings and press [].
4Press / to move to Standby Control and press [].
5Press / to move to the option you want and press [ ].
S t a n d b y C o n t r o l
A u t o
O n
O f f
M o v e | E n t e r | R e t u r n |
Auto
The message "No Signal" will appear if no source device is connected.
On
Off
The message "No Signal" will appear if no input signals are detected.
6The selected option will be applied.
The Standby Control option is only enabled when Source is set to PC or DVI.
If "No Signal" is displayed although a source device is connected, check the cable connection. Refer to page 56 for details about connecting source devices.
6 Settings 143