Adjusting the LCD Display

Note

Enabled only in PC mode.

Standby Control

Sets the standby mode, which will be activated when no input signal is detected.

•Off

A message will read <No Signal> if no input signal is detected.

•On

Power-saving mode will be activated if no input signal is detected.

•Auto

When no input signal is detected,

-Power-saving mode will be activated if an external device is connected.

-A message will read <No Signal> if no external device is connected.

Note

•Enabled only in PC, DVI, HDMI, or DisplayPort mode.

•This function at <AUTO> doesnt work at HDMI source.

Lamp Schedule

Adjusts the luminance to a user-specified value at a specified time.

OSD Display

Displays or hides a menu item on the screen.