Introduction

•To use a TV tuner box (US Only), make sure to connect it to the [HDMI IN 1] ter- minal.

HDMI IN 2 (MAGICINFO)

•Connect the [HDMI IN 2 (MAGICINFO)] terminal at the back of your LCD Display to the HDMI terminal of your digital output device using a HDMI cable.

•Up to HDMI 1.3 can be supported.

Note

The MAGICINFO OUT port must be connected to the [HDMI IN 2 (MAGICINFO)] port.

RJ 45 MDC (MDC PORT)

MDC(Multiple Display Control) Program Port

Connect the LAN cable to [RJ45 MDC] on the product and LAN on the PC. To use an MDC, the MDC program must be installed on the PC.

Note

Go to Multi Control and select RJ45 MDC as the MDC Connection.

RS232C OUT/IN (RS232C Serial PORT)

MDC(Multiple Display Control) Program Port

Connect a serial cable (cross type) to [RS232C] on the product and RS232C on the PC. To use an MDC, the MDC program must be installed on the PC.

Note

Go to Multi Control and select RS232C MDC as the MDC Connection.