Samsung LH46SLBPLBC/XJ, LH46SLBPLBC/EN manual Ad Hoc Network Setup, How to set up using Ad hoc

7Network

7.1.7 Ad Hoc Network Setup

You can connect to a mobile device supporting Ad-hoc connections without a wireless router or AP through the product.

How to set up using Ad hoc

1Go to Network Settings screen.

2Select Wireless (General), and press [ ], then press [ ] again.

3Select Ad hoc. The message “Ad hoc service supports a direct connection with Wi-Fi compatible devices like a cell phone or PC. Other network services may be limited. Do you want to change the network connection?” is displayed.

4Select OK, and press [ ]. The product searches for the mobile device.

5When the product finishes searching for your mobile device, input the generated Network Name (SSID) and Security Key into the device you want to connect and then connect to the network

z

z

If network does not operate normally, check the Network Name (SSID) and Security key again. An incorrect Security key may cause a malfunction.

If a device is connected once, it is displayed in the Network Setting list. When you connect to it again, you can find it in the list.

7 Network 139