7Network
7.3MagicInfo Lite Settings
OMENU [m] 
Network 
MagicInfo Lite Settings 
ENTER [
]
1Server
z Setting the MagicInfo Lite Server IP
Enter the server IP address and port number. Use 7001 as the port number.
If unable to connect to the server using port number 7001, check with your server administrator to find the correct port number and then change the port number.
zFTP Mode
Select an FTP operating mode: Active or Passive.
zDefault Storage
Specify the default memory to save schedules or content sent from the server to.
If the default storage space is set to USB, a schedule will not run if a USB device is not connected.
Send a notification message to the server when internal memory is used up.
2Storage
z Internal Memory: Displays the space currently being used or deletes all content.
z USB: Displays the space currently being used.
3Slideshow
z Image Viewer Time: Sets the time length you want to display images played from Local Schedule or by one of the auto playback functions.
z PPT Viewer Time: Sets the time length you want to display each page of a document file played from Local Schedule or by one of the auto playback functions.
z Image Effect: Configures the image transition effects.
Fade1, Fade2, Blind, Spiral, Checker, Linear, Stairs, Wipe, Random, None
4Schedule Name
z Select a schedule title format when creating a local schedule.
YYYYMMDD, YYYYDDMM, DDMMYYYY
5Safely Remove USB
z Safely removes USB memory.
6Information
z
z
z
Device Name: Displays the name of a device recognized by the server.
Serial Number: Displays the original identification number of a device.
Software Version: Displays the software version of a device.
Refer to 119 page for details about the MagicInfo Lite Player Guide menu.
