Introduction

IR OUT

Receives a signal from the remote control and outputs the signal through Loopout when a removable sensor board is connected.

CONTROL IN

Connects to the function (Power/Source) control buttons and receives the light sensor signal and remote control's IR signal.

DVI OUT (LOOPOUT)•Connect a monitor to another monitor through a DVI, DVI to HDMI cable.

•Connect a DVI or DVI-HDMI cable to [DVI OUT (LOOPOUT)] on the product and [DVI IN] or [HDMI IN] on another monitor.

•HDMI and network signals sent via the [DVI OUT(LOOPOUT)] port are displayed on the second display which has the [DVI IN] port.

Note

•The Loopout function can be used to duplicate the screen of the primary display. Connect [DVI OUT] on the primary display to [DVI IN] or [HDMI] on another display.

•A maximum of 100 monitors can be connec- ted to DVI-Loopout (using a 2m-long DVI cable). Up to HD resolution can be supported. Compatible input sources include DVI IN, HDMI IN 1, and HDMI IN 2 (MagicInfo).

•The status of the cable may have a great effect on the Loopout performance. RGB/COMPONENT IN (PC/COMPONENT Connection Terminal (Input))

•Connect the [RGB/COMPONENT IN] port on the monitor to the RGB port on the PC us- ing the D-SUB cable.

•Connect the [RGB/COMPONENT IN] port on the monitor to the COMPONENT port on the external device using the RGB to COM- PONENT cable.

•Connect the [RGB/COMPONENT IN] port on the monitor to the BNC port on the PC us- ing the RGB to BNC cable.