Introduction

Wall Mount Kit Specifications (VESA)

Note

Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact your nearest dealer. If you install the product on a slanted wall, it may fall and result in severe personal injury.

Note

•Standard dimensions for wall mount kits are shown in the table below.

•When purchasing our wall mount kit, a detailed in- stallation manual and all parts necessary for assembly are provided.

•Do not use screws that do not comply with the VESA standard screw specifications. Screws that are too long may cause damage to the inside of the product set.

•For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ depending on the wall mount spec- ifications.

•Do not fasten the screws too strongly this may dam- age the product or cause the product to fall, leading to personal injury. Samsung is not liable for these kinds of accidents.

•Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the consumer fails to follow the product installation instructions.

•Do not mount the product at more than a 15 degree tilt.

•Always use two people to mount the product to a wall.

Model name

VESA Spec.(A * B)

Standard Screw

Quantity

 

 

 

 

UD46A

600 x 400

M8

4EA

UD55A

 

 

 

 

 

 

 

Caution

Do not install your Wall Mount Kit while your product is turned on. It may result in personal injury due to electric shock.

Remote Control(RS232C)

Cable connections

 

interface

RS232C(9 pin)