Ports
"" The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
Port | Description |
|
|
| USB1 ¨(1.0A) | Connect to a USB memory device. |
| "" The USB ports on the product accept a maximum constant current of |
| 1.0A. If the maximum value is exceeded, USB ports may not work. |
|
|
| RJ45 | Connects to MDC using a LAN cable. (10/100 Mbps) |
| "" Use Cat7(*STP Type) cable for the connection. |
| *Shielded Twist Pair. |
|
|
| RS232C IN | Connects to MDC using an RS232C adapter. |
|
|
| DVI/MAGICINFO IN | DVI: Connects to a source device using a DVI cable or |
| MAGICINFO IN: To use MagicInfo, make sure to connect the |
| "" To activate MagicInfo, the IWB S5 function must be turned OFF. Please |
| contact a service centre. |
|
|
| HDMI IN1 | Connects to a source device using a HDMI cable or |
|
|
| HDMI IN 2 |
|
|
|
| DP IN | Connects to a PC using a DP cable. |
|
|
| TOUCH OUT1 | Connects to a PC to use the touch function. |
|
|
| USB 2(0.5A) | Connect to a USB memory device. |
| "" The USB ports on the product accept a maximum constant current of |
| 0.5A. If the maximum value is exceeded, USB ports may not work. |
|
|
| DVI/HDMI/AUDIO IN | Receives sound from a PC via an audio cable. |
|
|
| AUDIO OUT | Connects to the audio of a source device. |
|
|
| IR IN | Supplies power to the external sensor board or receives the light sensor signal. |
|
|
| RS232C OUT | Connects to MDC using an RS232C adapter. |
|
|
15