Configuring the touchscreen monitor settings

To properly use the touch function of the product in Windows, go to Tablet PC Settings and calibrate the product. "" First connect the touchscreen monitor before configuring the following settings.

"" The maximum number of touchscreen monitors that can be connected simultaneously varies, depending on the operating system and graphics card settings.

"" If Tablet PC Settings is not found in the Control Panel, search for Search Control Panel for Tablet PC Settings.

Calibration

2

Tap the page displayed on the product with your finger.

 

 

 

"" Instructions below are for Windows 8. The same method applies to both Windows 7,

 

 

"" In dual monitor mode: If the following page does not appear on the product, press the

 

 

Enter key to display the page.
Windows 8 and Windows 10.

 

 

 

 

"" After changing the Picture Size from the OSD menu, you may need to calibrate the picture

 

 

 

 

settings again.

 

 

 

 

"" In the occurrence of an error during calibration, go to Tablet PC Settings → the Display tab.

 

 

 

 

Tap Reset, and calibrate again.

 

 

 

 

1 In the Display tab, select Setup under Configure.

 

 

 

 

 

 

 

Touch this screen to identity it as the touchscreen.

 

 

 

 

If this is not the Tablet PC screen, press Enter to move to the next screen. To close the tool, press Esc.

 

 

 

 

 

 

23