Power Control

MENU m → System → Power Control → ENTER E

Power Control

Auto Power On

Off

 

 

Standby Control

Auto

Network Standby

Off

Power Button

Power On Only

–– The displayed image may differ depending on the model.

Auto Power On

This feature automatically turns on the product as soon as it is plugged in. Pressing the power button is not needed.

•• Off / On

Standby Control

You can set the screen standby mode to be applied when an input signal is received.

•• Auto

Power-saving mode will activate if no input signals are detected even though a source device is connected to the display.

The message No Signal will appear if no source device is connected.

•• Off

The message No Signal will appear if no input signals are detected.

――If No Signal is displayed although a source device is connected, check the cable connection.

――If No Signal Message is set to Off, the No Signal message does not appear. If this is the case, set No Signal Message to On.

•• On

Power-saving mode will activate if no input signals are detected.

76