Before connecting cables

――The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.

2

Silicone-Bar

3

4

Unfasten the screws, then remove the cover.

5

Remove the appropriate silicon bar for the thickness of the cable to connect.Different hole sizes and corresponding cablethickness for each:6――7 Ø hole x 1: Insert the 7 Ø cable――5.5 Ø hole x 6 : Insert the 5.5 Ø cable――3 Ø hole x 2 : Insert the 3 Ø cable――8.5 Ø hole x 1 : Insert the 8.5 Ø cable

Insert and keep the removed Silicone-Bar in the marked area to ensure it is not lost.

Insert the appropriate cable into the hole from which the Silicone-Bar was removed.

The cable should be connected as shown.Close the cover, then fasten the screws.

――After all the cables are connected, make sure to close the cover and fasten the screws to ensure it is water tight.

――Recommended torque : 10 - 12 kgf.cm

34