Samsung LN26A330J1D manual Connecting a VCR, From the back of the TV, Back of the VCR, On the TV

Connecting a VCR

Video Connection

TV Rear Panel

VCR Rear Panel

3	RF Cable (Not supplied)
4	Video Cable (Not supplied)
5	Audio Cable (Not supplied)

Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape.

➣Each VCR has a different back panel configuration.

➣When connecting a VCR, match the color of the connection terminal to the cable.

	Unplug the cable or antenna
1
	from the back of the TV.
	Connect the cable or antenna
2
	to the ANT IN terminal on the
	back of the VCR.
	Connect an RF Cable between
3
	the ANT OUT terminal on the
	VCR and the ANT IN terminal
	on the TV.
4	Connect a Video Cable between
	the VIDEO OUT jack on the
	VCR and the AV IN 1 [Y/VIDEO]

jack on the TV.

Connect Audio Cables between

5 the AUDIO OUT jacks on the VCR and the AV IN 1 [R- AUDIO-L] jacks on the TV.

➣If you have a “mono” (non-stereo) VCR, use a Y-connector (not supplied) to hook up to the right and left audio input jacks of the TV. If your VCR is stereo, you must connect two cables.

➣When connecting to AV IN 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does not match the color of the video cable (Yellow).

English-

BN68-01516B-00Eng-0220.indd 5

2008-02-20 �� 8:00:09