Samsung LN40A500T1F, LN46A500T1F user manual Upgrading the Software, SW Upgrade

Upgrading the Software

Samsung may offer upgrades for TV's firmware in the future. Please contact the Samsung call center at 1-800-SAMSUNG (726-7864) to receive information about downloading upgrades and using a USB drive. Upgrades will be possible by connecting a USB drive to the USB port located on your TV.

1.Insert a USB drive containing the firmware upgrade into the SERVICE port on the rear of the TV.

TV Rear Panel

USB Drive

2.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.

3.Press the ▲ or ▼ button to select “SW Upgrade”, then press the ENTER button.

Setup

Energy Saving	: Off
PIP
SW Upgrade	►

4.Press the ENTER button.

The message “Scanning for USB... It may take up to 30 seconds.” is displayed.

5.The message “Upgrade version XXXX to version XXXX? The system will be reset after upgrade.” is displayed.

Press the ◄ or ► to select the “OK”, then press the ENTER button.

Please be careful to not disconnect the power or remove the USB drive while upgrades are being applied. The TV will turn off and turn on automatically after completing the firmware upgrade. Please check the firmware version after the upgrades are complete. When software is upgraded, video and audio settings you have made will return to their default (factory) settings. We recommend you write down your settings so that you can easily reset them after the upgrade.

Software Upgrade

Scanning for USB.....

It may take up to 30 seconds.

Software Upgrade

Upgrade version XXXX to version XXXX? The system will be reset after upgrade.

OK Cancel

English - 60