Samsung LN46A950D1F, LN55A950D1F user manual Installing Batteries in the Remote Control

Installing Batteries in the Remote Control

1.Lift the cover at the back of the remote control upward as shown in the figure.

2. Install two AAA size batteries.

➣ Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment.

3.Replace the cover.

➣ Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time.

The remote control can be used up to about 23 feet from the TV.

(Assuming typical TV usage, the batteries should last for about one year.)

➣ Using the remote control with the ON/OFF light button set to On will reduce the battery usage time.

➣ If the remote control doesn’t work, check the following:

1.Is the TV power on?

2.Are the plus and minus ends of the batteries reversed?

3. Are the batteries drained?

4.Is there a power outage or is the power cord unplugged?

5.Is there a special fluorescent light or neon sign nearby?

Using the Remote Control Backlight Buttons

Use this feature in dark surroundings and when you are unable to see the remote control buttons clearly.

1.Press the ON/OFF light button.

➣Pressing the ON/OFF light button toggles between ON and OFF.

➣When ON, the button backlight is turned on for a moment.

➣Pressing a remote control button when the remote control is on turns the button backlight on for a moment. If you touch or move the remote control and the motion is detected by the sensor of the remote control, the button backlight will be turned on for a moment.

➣Since there is a vibrating device inside the remote control, shaking the remote control will result in a sound generated by the device.

➣The button backlight will not be turned on when the remote control is turned off.

English -