Samsung LN46A950D1F user manual Connecting to a Cable Box that Descrambles Some Channels, Splitter

Connecting to a Cable Box that Descrambles Some Channels

If your cable box descrambles only some
channels (such as premium channels),
follow the instructions below. You will need	ANT IN
a two-way splitter, an RF (A/B) switch and
four lengths of RF cable. (These items are
available at most electronics stores.)

1. Find and disconnect the cable that is connected to the ANT IN terminal on your cable box.

Incoming

➣ This terminal might be labeledcableSplitter “ANT IN”, “VHF IN” or simply, “IN”.

2.	Connect this cable to a two-way		Incoming
	splitter.
			cable	Splitter
						Cable Box
3. Connect an RF cable between the
	OUTPUT terminal on the splitter and
	the IN terminal on the cable box.	Incoming
			cable	Splitter		RF (A/B)
4. Connect an RF cable between the					Cable Box	Switch
	ANT OUT terminal on the cable box
	and the B–IN terminal on the RF(A/B)
	switch.	Incoming
		cable		Splitter
						RF (A/B)
					Cable Box	Switch
5. Connect another cable between the
	other OUT terminal on the splitter and					ANT IN
	the A–IN terminal on the RF (A/B)
	switch.	Incoming				TV Rear
		cable	Splitter		RF (A/B)
				Cable Box	Switch

6.Connect the last RF cable between the OUT terminal on the RF (A/B) switch and the ANT IN terminal on the rear of the TV.

After you have made this connection, set the A/B switch to the “A” position for normal viewing. Set the A/B switch to the “B” position to view scrambled channels. (When you set the A/B switch to “B”, you will need to tune your TV to the cable box’s output channel, which is usually channel 3 or 4.)

English - 10