Samsung LN55A950D1F Cable Network Setup, First, the Network selection must be set to Cable. See

Cable Network Setup

➣First, the “Network selection” must be set to “Cable”. (See page 120)

Auto Setup

If you connect the LAN cable and it supports DHCP, the Internet Protocol (IP) Settings are automatically configured.

➣Please check if the LAN cable is connected. (See page 118)

1.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.

2.Press the ▲ or ▼ button to select “Cable Network Setup”, then press the

ENTER button.

3.Press the ENTER button to select “Internet Protocol Setup”.

4.Press the ▲ or ▼ button to select “Auto Setup”, then press the ENTER button.

➣The Internet Protocol is set automatically.

➣Select “Network Test” to check the network connectivity. (Refer to page 122)

Press the EXIT button to exit.

	Time
Setup	Network selection	: Cable
	Cable Network Setup
	Wireless Network Setup
	V-Chip
	Caption
	External Settings
	Entertainment	: Off
	Energy Saving	: Off
	PIP

Cable Network Setup

Internet Protocol Setup : Auto
		AutoSetup
Network Test		Manual Setup
IP Address	:
		0	0	0	0
Subnet Mask	:	0	0	0	0
Gateway	:	0	0	0	0
DNS Server	:	0	0	0	0

Move Enter Return

Manual Setup

To connect the TV to the LAN using a static IP address, you must set up the Internet Protocol (IP).

➣Please check if the LAN cable is connected. (See page 119)

1.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.

2.Press the ▲ or ▼ button to select “Cable Network Setup”, then press the

ENTER button.

Setup

Time

Network selection : Cable

Cable Network Setup

Wireless Network Setup

V-Chip

Caption

External Settings

Entertainment : Off

Energy Saving : Off

PIP

3.Press the ENTER button to select “Internet Protocol Setup”.

4.Press the ▲ or ▼ button to select “Manual Setup”, then press the ENTER button.

5.Press the ▲, ▼, ◄ or ► button to move to an item, and press the numeric button to configure the selected item. Press the ENTER button.

➣Select “Network Test” to check the network connectivity. (Refer to page 122)

Press the EXIT button to exit.

Cable Network Setup

Internet Protocol Setup : Auto Setup
		Auto Setup
Network Test		Manual Setup
IP Address	:
		0	0	0	0
Subnet Mask	:	0	0	0	0
Gateway	:	0	0	0	0
DNS Server	:	0	0	0	0
	Move		Enter		Return
	Cable Network Setup
Internet Protocol Setup : Manual Setup
Network Test
IP Address	:
		0	0	0	0
Subnet Mask	:	0	0	0	0
Gateway	:	0	0	0	0
DNS Server	:	0	0	0	0
Move	~ Number		Enter		Return

English - 121