Standard Horizon Ff520 owner manual Fish Finder Setup Menu, Presets, Selection, Cruise

4. FISH FINDER SETUP MENU

·From the Full Fish Finder page, press [MENU] to show the Fish Finder Setup menu.

Figure 4 - Fish Finder Setup menu

·From the Chart page, to access this menu:

1.Press [MENU], move the ShuttlePoint knob to SETUP and press [ENTER].

2.Move the ShuttlePoint knob to FISH FINDER SETUP and press [ENTER].

The following paragraphs describe the Fish Finder Setup menu sub-options.

4.0PRESETS

Allows selection of the following preset modes: FISH, CRUISE. The default values are:

Fish	: Gain mode = Auto, Range mode = Auto Range, Gain Offset = 0%, Shift = 0, STC = Short, Noise
	Level = 2, Scrolling Speed = 10, Fish Symbols = Echo, A-Scope = On, Surface Declutter = 0.
Cruise	: Gain mode = Auto, Range mode = Auto Range, Gain Offset = 10%, Shift = 0, STC = Short, Noise
	Level = 4, Scrolling Speed = 10, Fish Symbols = Echo, A-Scope = On, Surface Declutter = 4.
	NOTE

For Gain and Gain Offset settings please see the Sensitivity menu (Par. 4.5).

For Range and Shift settings see the Range menu (see Par. 4.3).

4.1PAGE SELECTION

The Page Selection menu allows you to adjust the Fish Finder display page to your preference, sizing the Chart and Fish Finder page (see also Par. 3.1.0a).

FF520 Page 25