Standard Horizon Ff520 owner manual System Information page for CP180/CP180i/CPV350

7.Move the ShuttlePoint knob to highlight YES and press [ENTER] to confirm.

8.Press [CLEAR] to exit.

WARNING

Turn Off and after few seconds turn On the Fish Finder in case of failed firmware upload.

3.4SYSTEM INFORMATION PAGE FOR CP180/CP180i/CPV350

For troubleshooting you maybe asked by a Standard Horizon Product Support Technician for the software version of Fish Finder.

The following procedure is how to access this information.

1.From the Chart Page, press [MENU] for two times to open the Setup Menu.

2.Move the ShuttlePoint knob to highlight ABOUT... and press [ENT] or move the ShuttlePoint knob to the right.

3.A window will be shown with the system information on the Fish Finder Library version and on the Fish Finder module type and version.

4.Press [CLR] to exit.

3.4.0The System Update menu

The System Update menu allows downloading the Fish Finder firmware into the Fish Finder device. To select this menu follow the procedure:

1.From the Chart Page, press [MENU] for two times to open the Setup Menu.

2.Move the ShuttlePoint knob to highlight ABOUT... and press [ENT] or move the ShuttlePoint knob to the right.

3.A window will be shown with the system information.

4.Press [MENU].

5.Move the ShuttlePoint knob to highlight BBFF FIRMWARE SOFTWARE and press [ENT] or move the ShuttlePoint knob to the right.

6.The current Fish Finder firmware version is shown in the System Update window that appears on the screen. Insert the C-CARD with the firmware in one of the GPS Chart Plotter available slots, and the press [ENT] to update.

7.Move the ShuttlePoint knob to highlight YES and press [ENT] to confirm.

8.Press [CLR] to exit.

WARNING

Turn Off and after few seconds turn On the Fish Finder in case of failed firmware upload.

Page 24 FF520