3.2.0The MENU key
1. Pressing [MENU] when a Fish Finder page is displayed, will show the Fish Finder Setup:
Figure 3.2.0 - The MENU key, Fish Finder Setup
2. If pressed again the GPS Chart Plotters Main Menu will be displayed.
NOTE
To change to the Chart page [MENU] must be pressed 2 times to show the Main Menu. Then move the ShuttlePoint Knob to select the Chart page and press [ENTER] or move the ShuttlePoint knob to select the Chart page.
3.2.1The ENTER key
1. Pressing [ENTER] when a Fish Finder page is displayed, will show the Sensitivity Menu.
Figure 3.2.1 - The ENTER key, Sensitivity Menu
3.2.2The CLEAR key
1.Pressing [CLEAR] hides the Variable Depth Marker (VDM).
2.Pressing [CLEAR] in ZOOM mode with AUTORANGE enabled, selects the BOTTOM FOLLOWING mode. In such mode the ZOOMED view automatically follows the bottom contour to keep it always displayed in the lower half of the screen.
3.2.3The ZOOM IN and ZOOM OUT keys
Pressing [ZOOM IN] when any of the Fish Finder displays are shown, allows the page to be zoomed into 2X or 4X the normal display.
FF520 |
| Page 21 |
|
