2.2CONNECTING THE GPS CHART PLOTTERS TO THE FF520
CP155C/CP1000C/CP180/CP180i/CPV350 connections to FF520
1.If the power/data cable is plugged into the CP155C/CP1000C/CP180/CP180i/CPV350, remove it.
2.Route the cable from the FF520 to the GPS Chart Plotters location.
NOTE
You can disconnect the "Tee" cable from the FF520 to make installation easier. Refer to Section 7.
3.Plug in the "Tee" connector into the GPS Chart Plotter DC/Data connector.
4.Plug in the power data cable into the "Tee" connector.
Figure 2.2 - CP155C Connection
Figure 2.2a - CP1000C Connection
CP180/CP180i | GPS antenna for |
|
|
| |
| CP180i |
|
| Connector present | FF520 |
| ONLY on | |
| CP180 |
|
Tee Cable
Figure 2.2b - CP180/CP180i Connection
Page 10 |
| FF520 |
|
