Setting the Blue Only Mode
This function is for AV device measurement experts. This function displays the blue signal only by removing the red and green signals from the video signal so as to provide a Blue Filter effect that is used to adjust the Color and Tint of video equipment such as DVD players, Home Theaters, etc.
Using this function, you can adjust the Color and Tint to preferred values appropriate to the signal level of each video device using the Red/Green/Blue/Cyan/Magenta/Yellow Color Bar Patterns, without using an additional Blue Filter.
1.Follow the “Activating Picture Options” instructions numbers 1 and 2. (Refer to page 21).
2.Press the ▲ or ▼ button to select "Blue Only Mode", then press the ENTER
button.
3.Press the ▲ or ▼ button to select "Off" or "On", then press the ENTER
button. Press the EXIT button to exit.
TV
TV
Picture Options
Color Tone | : Normal | ► |
Size | : Wide | ► |
Digital NR | : Auto | ► |
DNle | : Off | ► |
HDMI Black Level | : Normal | ► |
Blue Only Mode | : Off | ► |
Move 
Enter 
Return
Picture Options
Color Tone | : Normal | ||
Size | : Wide |
| |
Digital NR | : Auto |
| |
DNle | : Off |
| |
HDMI Black Level | : Normal | ||
Blue Only Mode | : |
| Off |
|
|
| On |
Move 
Enter 
Return
“Blue Only Mode” is available when the picture mode is set to “Movie” or “Standard”.
Resetting the Picture Settings to the Factory Defaults
1.Press the MENU button to display the menu. Press the ENTER
button, to select “Picture”.
2.Press the ▲ or ▼ button to select "Reset", then press the ENTER
button. Press the ▲ or ▼ button to select “OK” or “Cancel” then press the ENTER
button.
Press the EXIT button to exit.
Each mode can be reset.
TV | Picture |
|
|
Mode | : Standard | 7 | |
Backlight |
|
| |
Contrast |
|
| 95 |
Brightness |
|
| 45 |
Sharpness |
|
| 40 |
Color | G 50 | R | 50 |
Tint | 50 | ||
Detailed Settings |
|
| |
Picture Options | : | OK |
|
Reset |
| ||
| Cancel |
| |
Move | Enter | Return | |
English - 24
