Introduction
When OSD is not on the screen, push the button to adjust brightness.
AUTO button
When OSD is not on the screen, push the button for auto adjustment.
Adjust buttons [
]
These buttons allow you to adjust items in the menu.
Power button [
]
Use this button for turning the product on and off.
Note
See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your monitor OFF when it is not needed or when leaving it unattended for long periods.
Rear
Note
The configuration at the back of the product may vary from product to product.
POWER port
Connect the power cord for your monitor to the POWER port on the back of the product.
USB IN port
Connect the 
of the monitor and the USB of the computer with the USB cable.
RGB IN port
Connect the
Kensington Lock