Adjusting the Monitor

Direct Functions

Note

•The monitor LED displays for 10 seconds

•Press the MENU button four times continuously to exit OSD

AUTO(Available in Analog mode only)

When no OSD is displayed,press”” button to perform the AUTO function, the auto adjustment screen appears as shown in the animated screen on the center.

Auto adjustment allows the monitor to self-adjust to the incoming Analog signal.

If auto adjustment does not work properly, press ““ button again to adjust picture with more accuracy.

If you change resolution in the control panel, auto function will be executed automatically.

Brightness

When no OSD is displayed,press”” button to perform the Brightness function.

Toggle the Source

In power saving mode, the power LED is blinking all the time, or in the Checksignal menu,press”/” buttons to perform the Source function.

OSD Function

Brightness

 

 

 

 

 

MagicBright

Custom

NotePC

Internet

Movie

Dynamic

 

 

 

 

 

Contrast

Source

Analog

USB

 

 

 

Image Size

Auto

Wide