Connections

Monitor connection with D-SUB cable

Connect the power cord for your monitor to the power port on the back of the monitor.

Plug the power cord for the monitor into a nearby outlet.

Use a connection appropriate for your computer.

Using the D-sub (Analog) connector on the video card.

•Connect the signal cable to the 15-pin, D-sub port on the back of your monitor.

[RGB IN]

Connected to a Macintosh.

•Connect the monitor to the Macintosh computer using the D-sub connection cable.

Note

If the monitor and the computer are connected, you can turn them on and use them.

Use a general monitor in the following cases.

•When using a single display

•When playing a 3D game

•When watching a BluRay or HD video

Note

For laptop, "LCD+CRT Dual View" mode must be selected first before the multi-monitor con- figuration.