![](/images/new-backgrounds/1234792/23479291x1.webp)
indicator on the monitor blinking at 1 second intervals?
restore the image on the screen.
If there is still no image, press the 'SOURCE/' button. Then press any key on the keyboard again to activate the monitor and restore the image on the screen.
| Connected using | You may get a blank screen if you boot the system |
| the DVI cable? | before you connect the DVI cable, or disconnect and then |
|
| reconnect the DVI cable while the system is running as |
|
| certain types of graphic cards do not send out video |
|
| signals. |
|
| Connect the DVI cable and then reboot the system. |
I cannot see the | Have you locked | Unlock the OSD by pressing the [MENU / ] button for at |
On Screen | the On Screen | least 5 seconds. |
Display. | Display (OSD) |
|
| Menu to prevent |
|
| changes? |
|
The screen shows | Is the screen | Check the signal cable connection. |
strange colors or | displaying only one |
|
just black and | color as if looking at | Make sure the video card is fully inserted in it's slot. |
white. | the screen through |
|
| a cellophane |
|
| paper? |
|
| Have the screen | Reboot the computer. |
| colors become |
|
| strange after |
|
| running a program |
|
| or due to a crash |
|
| between |
|
| applications? |
|
| Has the video card | Set the video card by referring to the video card manual. |
| been set properly? |
|
The screen | Have you changed | Adjust screen image position and size using the OSD. |
suddenly has | the video card or |
|
become | the driver? |
|
unbalanced. |
|
|
| Have you adjusted | Adjust the resolution and frequency at the video card. |
| the resolution or | (Refer to the Preset Timing Modes). |
| frequency to the |
|
| monitor? |
|
| The screen can be unbalanced due to the cycle of the video card signals. | |
| Readjust Position by referring to the OSD. | |
The screen is out | Have you adjusted | Adjust the resolution and frequency of the video card. |
of focus or OSD | the resolution or | (Refer to the Preset Timing Modes). |
cannot be | frequency on the |
|
adjusted. | monitor? |
|
LED is blinking but | Is the frequency | Adjust the frequency properly by referring to the video |
no images on the | properly adjusted | card manual and the Preset Timing Modes. |
screen. | when checking the | (The maximum frequency per resolution may differ from |
| Display Timing on | product to product.) |
| the menu? |
|
There are only 16 | Have the Windows | Windows XP : |
colors shown on | colors been set | Set the resolution in the Control Panel → Appearance |
the screen. The | properly? | and Themes → Display → Settings. |
screen colors have |
|
|
changed after |
| Windows ME/2000 : |
changing the video |
| Set the resolution in the Control Panel → Display → |
card. |
| Settings. |
| Has the video card | Set the video card by referring to the video card manual. |
| been set properly? |
|
There is a | Have you installed | Install the monitor driver according to the Driver |
message that | the monitor driver? | Installation Instructions. |