![](/images/new-backgrounds/1273924/27392427x1.webp)
|
| the monitor and restore the image on the screen. | |
I cannot see the On | Have you locked | Unlock the OSD by pressing the [ | ] button for at |
Screen Display. | the On Screen | least 5 seconds. |
|
| Display (OSD) |
| |
|
|
|
Menu to prevent changes?
The screen shows | Is the screen |
strange colors or just | displaying only one |
black and white. | color as if looking |
| at the screen |
| through a |
| cellophane paper? |
Check the signal cable connection.
Make sure the video card is fully inserted in its slot.
| Have the screen | Reboot the computer. | |
| colors become |
| |
| strange after |
| |
| running a program |
| |
| or due to a crash |
| |
| between |
| |
| applications? |
| |
| Has the video card | Set the video card by referring to the video card | |
| been set properly? | manual. | |
The screen suddenly | Have you changed | Adjust screen image position and size using the OSD. | |
has become | the video card or |
| |
unbalanced. | the driver? |
| |
| Have you adjusted | Adjust the resolution and frequency at the video card. | |
| the resolution or | (Refer to thePreset Timing Modes). | |
| frequency to the |
| |
| monitor? |
| |
| The screen can be unbalanced due to the cycle of the video card signals. | ||
| Readjust Position by referring to the OSD. | ||
The screen is out of | Have you adjusted | Adjust the resolution and frequency of the video card. | |
focus or OSD cannot | the resolution or | (Refer to the Preset Timing Modes). | |
be adjusted. | frequency on the |
| |
| monitor? |
| |
LED is blinking but | Is the frequency | Adjust the frequency properly by referring to the video | |
no images on the | properly adjusted | card manual and the Preset Timing Modes. | |
screen. | when checking the | (The maximum frequency per resolution may differ from | |
| Display Timing on | product to product.) | |
| the menu? |
| |
There are only 16 | Have the Windows | Windows XP : | |
colors shown on the | colors been set | Set the resolution at the Control Panel → Appearance | |
screen. The screen | properly? | and Themes → Display → Settings. | |
colors have changed |
|
| |
after changing the |
| Windows ME/2000 : | |
video card. |
| Set the resolution at the Control Panel → Display → | |
|
| Settings. | |
| Has the video card | Set the video card by referring to the video card | |
| been set properly? | manual. | |
There is a message | Have you installed | Install the monitor driver according to the Driver | |
that reads | the monitor driver? | Installation Instructions. | |
"Unrecognized |
|
| |
monitor, Plug & Play | See the video card | Install the monitor driver according to the Driver | |
(VESA DDC) | |||
manual to see if the | Installation Instructions. | ||
monitor found". | |||
Plug & Play (VESA |
| ||
| DDC) function can |
| |
| be supported. |
| |
Check when | MagicTune™ | * To check whether your PC is available for | |
MagicTune™ does | feature is found | MagicTune™ feature, follow the steps below (When | |
not function properly. | only on PC (VGA) | Windows is XP); |