Pioneer VSX-D409 manual Checking Preset Codes VSX-D509S, 2Press the MULTI CONTROL button which you

Preparations

Programming a Different Component into a MULTI CONTROL button (VSX-D509S)

This feature changes a selected Multi Control button to a different component. For example, if you don’t have a second TV, but you do have a second VCR, you could reassign the TV Multi Control to VCR so that VCR control buttons are available when you select TV.

DVD	TV	VCR	CD-R
	MULTI CONTROL
RCV	CD	TUN	TVC

3	1	2	3
	MIDNIGHT	5.1CH	ATT

4 5 6

SIGNAL SELECT			EFFECT
7		8	9
+10			DISC
		0	ENTER
TV CONTROL
		TV
7￿ 4￿ ¢￿
2	DSP	TEST TONE

CH SELECT CH LEVEL FL DIMMER

LOUDNESS FUNCTION MUTING SETUP

ë￿

2

3

1

1Press SETUP and hold for three seconds.

The LED will blink twice.

2Press the MULTI CONTROL button which you

want to change.

For the example above, press VCR.

3Press 9, 9, then 2.

4Press the MULTI CONTROL button which you

want to be duplicated.

In the above example, press TV. The LED will blinks twice. The TV button will now make the remote function as a VCR controller. Remember to assign the correct preset code for your equipment (the default is for Pioneer equipment).

Set up

Checking Preset Codes (VSX-D509S)
				To check which preset code is associated with a Multi Control button:
DVD	TV VCR	CD-R	2	1 Press SETUP and hold for three seconds.
				The LED on the remote will blink twice.
	MULTI CONTROL
RCV	CD TUN	TVC

4

7

1	2	3
MIDNIGHT	5.1CH	ATT
4	5	6
SIGNAL SELECT		EFFECT
7	8	9
+10		DISC
	0	ENTER
TV CONTROL
	TV

7￿ 4￿ ¢￿

2 DSP TEST TONE

CH SELECT CH LEVEL FL DIMMER

LOUDNESS FUNCTION MUTING SETUP

ë￿

6

5

3

3

1

2Press the MULTI CONTROL button you want to check the preset code for.

3Press 9, 9 then 0.

Each preset code consists of four digits, for example 1329. Each digit will be represented by a series of blinks on the remote’s LED—3 blinks to represent the digit “3”, etc.

4Press 1.

The blinking LED indicates the left-most digit of the preset code (“1” in the example above).

5Press 2.

The blinking LED indicates the next digit of the preset code (“3” in the example above).

6Press 3.

The blinking LED indicates the next digit of the preset code (“2” in the example above).

7Press 4.

The blinking LED indicates the right-most digit of the preset code (“9” in the example above).

29